Larsen & Brusgaard ALTITRACK - Feet; Meter Selector

37
Main Setup Display - Turn the ALTITRACK OFF - Delete Jump - Set total number of jumps - Set total freefall time
-Setcurrentdate-Setcurrenttime-Deletelogbook-MPH/KMH-Feet / Meter-(TAS)TrueAirspeed/(SAS)
Skydiver’sAirspeed-CanopylogEnable/Disable-DiveType-Celsius/Fahrenheit-BeepON/OFF
10.9 Feet / Meter Selector
Press againtoselect“FT/MTR”
Fig.17-Feet/MeterSelector
Press to toggle between FT and MTR.
Note: Jump data are continuously stored in both feet and meters. At any time
stored information may be displayed in either unit of measurement by selecting the
respective mode.
Main Setup Display - Turn the ALTITRACK OFF - Delete Jump - Set total number of jumps - Set total freefall time - Set
current date - Set current time - Delete logbook - MPH / KMH-Feet/Meter-(TAS)TrueAirspeed/(SAS)Skydiver’s
Airspeed-CanopylogEnable/Disable-DiveType-Celsius/Fahrenheit-BeepON/OFF
10.8 MPH / KMH Selector
Press againtoselect“MPH/KMH”
Fig.16-MPH/KMHSelector
Press to toggle between MPH and KMH.
Note: Jump data are continuously stored in mph and kmh. At any time stored information
may be displayed in either unit of measurement by selecting the respective mode.