Need help?Do you have a question about the Larsen & Brusgaard ALTITRACK and is the answer not in the manual?
General| Type | Digital Altimeter |
|---|---|
| Pre-settable Altitude Awareness | Yes |
| Operating Temperature | -20°C to +60°C |
| Measurement Range | 0 to 9000 m |
| Accuracy | ±3 m |
| Power Supply | Battery |
| Power Source | Battery |
| Resolution | 1 foot |
| Battery Life | 2 years |
Describes the Altitrack's analog face with digital components for superior accuracy.
Lists key features like electroluminescent backlight, stepper motor, auto-calibration, and shock resistance.
Details data storage, jump analysis, units, compatibility, battery, and mounting features.
Details the Right/Left Front Buttons, ACCESS indicator, and LOW BAT indicator on the analog display.
Describes components of the digital display, including LCD, buttons, and battery compartment.
Explains the connector for PC data download and firmware upgrade, requiring specific accessories.
Explains various display elements and icons such as Jump Number, Date/Time, Freefall indication, and Battery status.
Advises verifying the backlight functionality before performing jumps in low-light conditions.
Explains manual zeroing to ensure accurate readings by adjusting to local elevation.
Details the process to adjust for different DZ elevations by activating the 'Altitude Offset' mode.
Outlines options for personalizing settings like display, jump data, units, and preferences.
Details a secondary method for turning off the device via the Main Setup Display.
Instructions for deleting a single recorded jump from the device's logbook.
Procedure to manually set or correct the total number of jumps recorded by the device.
Procedure to manually input or correct the total accumulated freefall time.
Guide for setting the current date on the device, specifying the YYYY:MM:DD format.
Guide for setting the current time on the device, specifying the 24-hour format.
Instructions on how to erase all data from the device's logbook, including jump and freefall times.
Allows selection between miles per hour (MPH) and kilometers per hour (KMH) for speed display.
Allows selection between feet (FT) and meters (MTR) for altitude display.
Explains how to select between TAS and SAS for calculating and displaying airspeed.
Option to enable or disable the logging of canopy flight profiles to save memory.
Allows selection of dive types and adjustment of freefall sensitivity for different skydiving disciplines.
Allows selection of temperature units between Celsius (C) and Fahrenheit (F).
Controls the audible beep function of the Altitrack device.
Displays jump number, freefall time, speeds, and altitudes for the current jump.
Warns about potential inaccuracies in speed recordings due to body movements or mounting position.
Shows time, speed, temperature, and altitude at specific points during a jump playback.
Displays the date, time, and selected dive type for each recorded jump.
Shows current time/date, internal temperature, and current altitude readings.
To Next Page
