Larsen & Brusgaard ALTITRACK - MPH; KMH Selector

36
Main Setup Display - Turn the ALTITRACK OFF - Delete Jump - Set total number of jumps - Set total freefall time - Set
current date - Set current time - Delete logbook - MPH / KMH-Feet/Meter-(TAS)TrueAirspeed/(SAS)Skydiver’s
Airspeed-CanopylogEnable/Disable-DiveType-Celsius/Fahrenheit-BeepON/OFF
10.8 MPH / KMH Selector
Press againtoselect“MPH/KMH”
Fig.16-MPH/KMHSelector
Press to toggle between MPH and KMH.
Note: Jump data are continuously stored in mph and kmh. At any time stored information
may be displayed in either unit of measurement by selecting the respective mode.