Laser Reference pro shot L1-M - Other Tools and Supplies Needed

18
2. Other tools and supplies needed:
Description:
Loctite 290 or equivalent
Nyogel 773A or equivalent
General Electric R.T.V. 108 or equivalent
Grounded soldering iron
Oscilloscope
Static-free work station
 FIG. 4
Axis conventions used in this manual
Refer to the owner's manual if you are not familiar with the operation
and use of the controls and displays on the product. The owner's
manual also includes a basic calibration check routine that may be
useful in the event that you do not have the Laser Reference #50-
1000 calibration range or equivalent.