Page 13
4.11 Espresso Group Water Temperature Regulation
4.11.1 Standard Temperature Adjustment
1. When the machine is On (ON/STBY solid green), press the button ON/OF
F
and keep it pressed for 3 seconds, the control light (22) and the one concerning
the set temperature start flashing. For example, if the set temperature is 95°C,
light (18) starts flashing.
2. In order to change the operating temperature, press and release the Hot Water
button (23) Every press of the button corresponds an increase of the temperature of 1°C
(with the flashing of the corresponding light). When the maximum temperature of 97°C (20)
is reached, the selection restarts from the minimum temperature of 91°C (14) (cyclic mode).
3. O
nce you choose the desired temperature, in order to lock in this value, press
the ON/OFF (27) button, the machine will then go back to its normal functioning.
T
he v
a
lue of the operating temperature of the machine is easily changed in order to
i
mprove the final result in the cup depending on the coffee blend used and the user’s
p
ersonal preference.
To Next Page
Loading...
