espresso coffee machines
LSI 022 - Rev. 00 - Ed. 12/2015
8
The appliance must be installed on a flat bearing surface, the stability of which needs to be checked.
The appliance must be installed where use and maintenance are restricted to trained staff.
The electrical power system, water supply system and drainage system must prearranged by the customer in an ideal
position to permit the correct installation. The installer cannot modify existing systems that have been arranged by the
customer. refer to the chapter “Pre-installation arrangements organised by the customer” in the “USER AND MAINTENANCE
MANUAL” attached to each machine.
Attention!
Attention!
To Next Page
Loading...
