!
Danger!
Should it be necessary to replace the power cord of the device, use only the following types: CET ELETRIC H07RN-F 5 x 2.5 mm (400V)
for 2/3-group versions, 5 x 4 mm (400V) for 4-group versions - CET ELETRIC SINGLE-PHASE 3 x 2.5 mm (220V) 2-group versions, 3 x 4
mm (220V) for 3/4-group versions. Cable replacement must be carried out by qualified perso- nals. Total electrical safety of the
appliance is achieved only with proper connection to an effective grounding system in accordance with applicable laws.