!
Warning.
The device may be used only for the purpose for which it was intended. Any other use is to be considered improper, and therefore
unreasonable. The manufacturer cannot be held responsible for any damage caused by improper, erroneous and unreasonable use.
!
Warning.
Ensure that the customer has installed the equipment according to the instructions given in the "USE AND MAINTENANCE MANUAL"
supplied w i t h the equipment.
!
Warning.
Make sure that the power supply of the customer- prepared system corresponds to the power indicated on the nameplate of the ap-
plication.
!
Danger!
The appliance is supplied without a plug, thus intended to be installed to the power supply, so it is necessary to pre- see a multipole
switch with contact opening equal to or greater than 3 mm, as required by current standards.
2.
GENERAL TIPS FOR THE INSTALLER
Carefully read the instructions and warnings contained in this manual and in the "USE AND MAINTENANCE MANUAL," a s they provide
important information regarding the installation of the appliance.
To Next Page
Loading...
