Safety Information
About This Manual
Safety Information 425HD-MD/masterdoc101602 2-3
2
2.2 About This Manual
The purpose of this manual is to assist you in properly and safely operating and maintain-
ing the Articulator. Read and understand this entire manual before attempting to set-up,
operate, adjust, perform any maintenance on, or store the Articulator. This manual pro-
vides essential information and instructions which will help you enjoy years of dependable
performance from the Articulator.
The designed and tested safety of the Articulator is dependent upon its operation within
the parameters and limitations explained in this manual. Be familiar with and follow all
safety rules in this manual as well all safety rules for any related equipment.
Although these instructions have been compiled through extensive field experience and
engineering data, some information presented herein may be general in nature due to
unknown and/or varying operating conditions. However, these instructions, combined
with your increasing experience with the Articulator, will enable you to develop proce-
dures suitable to your particular cutting application.
The illustrations and data used in this manual were current at the time of printing, but the
Articulator may vary slightly due to ongoing engineering changes. LasTec reserves the
right to implement engineering and design changes to the Articulator as may be neces-
sary without prior notification.
Throughout this manual, we make references to right and left directions. We determine
right and left while sitting in the operator seat and facing in the direction of forward travel.
Blade rotation is clockwise as viewed from the top of the Articulator.
Safety instructions are important! Read all safety rules in this manual
as well as all safety rules in any related equipment manuals!
To Next Page
Loading...