Lastec 425HD - First 25 Operating Hours; First 50 Operating Hours; Every 50 Operating Hours; Every 100 Operating Hours

Maintenance
First 25 Operating Hours
Maintenance 425HD-MD/masterdoc101602 5-3
5
5.3 First 25 Operating Hours
 Change the hydraulic oil & filter.
5.4 First 50 Operating Hours
 Change engine oil and filter.
1
5.5 Every 50 Operating Hours
 Inspect engine fuel pipes and clamps.
1
 Grease all blade spindle bearing housings. Fill until grease purges from weep hole
in bearing housing.
 Inspect all bronze bushings for wear.
 Check and clean if necessary any debris that may have accumulated during
operation.
5.6 Every 100 Operating Hours
 Clean or replace air cleaner & filter elements.
1
 Inspect engine fan & alternator belt.
5.7 Every 200 Operating Hours
 Change engine oil and filter.
1
 Grease the gearbox.
5.8 Every 400 Operating Hours
 Replace Fuel Filter Cartridge.
1
1. Refer to the Kubota Diesel Engine Operator’s Manual located in the back of this manual.

Change the hydraulic oil & filter.