Need help?Do you have a question about the Lastec 425HD and is the answer not in the manual?
Emphasizes the critical importance of reading and understanding the entire manual before operating the Articulator.
Guides users on recording model and serial numbers for parts ordering and warranty validation.
Details the limited product warranty terms, conditions, and exclusions for the Articulator.
Lists specific component parts warranted by their respective manufacturers and where to find info.
Provides instructions on using genuine parts for servicing to maintain warranty and performance.
Instructions for completing and returning the warranty registration form to validate the warranty.
Explains the meaning of caution, warning, and danger symbols used throughout the manual.
Outlines the purpose of the manual and provides general operating guidelines and directional references.
Stresses the importance of keeping all safety covers installed during operation for accident prevention.
Lists essential safety rules to follow before starting and operating the Articulator.
Details critical safety guidelines to adhere to during the operation of the Articulator.
Outlines essential safety precautions to take when performing maintenance on the Articulator.
Provides safety guidelines for storing the Articulator, particularly concerning fuel and exhaust.
Step-by-step instructions for assembling the Lastec Articulator Model 425HD-MD.
Explains how to set and release the parking brake and its indicator system.
Provides instructions and safety precautions for fueling the Articulator with diesel fuel.
Details how to open and close the engine cover and operator seat pan for access.
Locates and describes the function of the fuel shut-off valve for engine operation.
Guides on checking and maintaining the correct engine oil level and quality.
Instructions for checking and cleaning the air cleaner elements for proper engine performance.
Explains how to check and maintain the coolant level and condition to prevent overheating.
Details checking hydraulic fluid level, condition, and inspecting for leaks.
Provides procedures for adjusting hydraulic pumps to prevent drive wheel creep.
Describes how to adjust hydraulic pumps for freewheeling when towing the articulator.
Guides on inspecting and checking the tension of hydraulic pump drive belts.
Instructions for checking gearbox oil level, condition, and performing lubrication.
Details inspection, adjustment, and potential damage related to gearbox belts.
Explains the importance and procedure for aligning gearbox pulleys for proper belt function.
Guides on inspecting, checking tension, and replacing the mower deck drive belt.
Instructions for inspecting, checking tension, and replacing individual mower deck belts.
Explains the function and importance of checking the weight transfer springs.
Covers inspection, installation, and maintenance of the Articulator's high-lift blades.
Ensures the operator seat is secure and properly adjusted for operator comfort and control access.
Details checking steering control arms for proper linkage, freedom of movement, and neutral lock.
Guides on checking the functionality of the Articulator's headlights and hazard lights.
Explains how to adjust the mower deck height before operating the Articulator.
Provides specific calibration steps for the mower deck height cables on the 425HD model.
Provides specific calibration steps for the mower deck height cables on the 425MD model.
Covers checking tire pressure, gauge wheels, and swivel collars for proper function.
General inspection points including decals, covers, safety devices, and discharge chute.
Instructions on checking battery charge, connections, and safety precautions.
Guidance on checking engine exhaust, sounds, oil pressure, and coolant temperature.
Details testing and adjusting the hydraulic and manual mower deck lift arms.
Locates the hour meter and suggests recording readings for maintenance tracking.
Refers to the maintenance checklist in Section 5 for proper upkeep.
A comprehensive checklist for inspection before each operation of the Articulator.
Step-by-step guide on safely starting the Articulator's engine, including pre-heat and safety interlocks.
Procedures for safely shutting down the Articulator's engine and preparing for dismounting.
Explains how to control the Articulator's movement using the steering control arms.
Guidance on adjusting ground speed for cutting efficiency and safe transport.
Details how to adjust the mower deck height using the control stick and spacers.
Instructions on engaging and operating the mower deck and its safety features.
Stresses the importance of proper maintenance and adherence to schedules for longevity.
Lists daily maintenance tasks including greasing, inspection, and cleaning.
Specifies initial maintenance tasks after the first 25 operating hours.
Outlines maintenance tasks required after the first 50 operating hours.
Details maintenance tasks to be performed every 50 operating hours.
Specifies maintenance tasks for every 100 operating hours.
Lists maintenance tasks for every 200 operating hours.
Outlines maintenance tasks for every 400 operating hours.
Details maintenance tasks to be performed every 500 operating hours.
Specifies maintenance tasks for every 800 operating hours.
Lists annual maintenance tasks for the Articulator.
Outlines bi-annual maintenance tasks for the Articulator.
A comprehensive schedule detailing maintenance tasks based on operating hours.
Provides detailed specifications for the Articulator's mower deck, transmission, and engine.
A schematic illustrating the hydraulic system components and flow for the 425HD model.
A schematic illustrating the hydraulic system components and flow for the 425MD model.
An electrical schematic showing the wiring and components of the Articulator's electrical system.
A diagram illustrating the routing and identification of the mower deck belts.
General| Brand | Lastec |
|---|---|
| Model | 425HD |
| Category | Lawn and Garden Equipment |
| Language | English |
To Next Page