Starting up
05.08.99
YAEE0012
21
6.5.4 Other error messages
−
Other error messages shown on display.
EEE
changes
with error code, e.g. 0.
!
various temperature probe faults.
!
pump fault, proceed as in Section 6.5.3.
☞
−
If the fault report is repeated
!
pull out the mains plug and try whether the motor
can be rotated by the fan blade inserting a screwdriver into the ventilation opening
at the back of the unit.
−
Error code 0 ...255
!
microprocessor error.
−
Error code 1000...1255
!
slave processor error.
−
Indication can be used for remote dia
nosis.
−
After rectifying the fault, reset with the key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
