Safety notes
05.08.99
YAEE0012
23
produced. Ensure appropriate ventilation!
•
Immersion thermostats have to be fixed carefully at the bath vessels!
•
Only use bath vessels which are appropriate for the intended operating temperatures!
•
When changing the bath liquid from water to oil, for temperatures above 100 °C, carefully remove all
traces of water, also from tubing and from the external consumer, otherwise
!
danger of burns
through delayed boiling!
•
The cooling coil with the cooling water has only to be used for operating temperatures below 100°C.
At higher temperatures
!
danger of hot vapour to be produced!
•
Always pull out the mains plug before cleaning, maintenance or moving the thermostat!
•
Repairs on the control unit and the refrigeration system must be carried out by properly qualified
personnel only!
•
Values for temperature control and indicating accuracy apply under normal conditions according to
DIN 58966. High-frequency electromagnetic fields may under special conditions lead to unfavourable
values. This does not affect the safety.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
