Lauda IN 530 T User Manual

The Ethernet interface can be configured in two dierent ways:
Automatically
obtain LAN con-
figuration
- In order for this to work, a DHCP server must be
present in the local network (LAN). If communication
is direct, the control station must support the auto IP
standard.
Manually con-
figure LAN con-
figuration
- Manual configuration must be performed if a DHCP
server is not available, auto IP standard is not supported
or you wish to use the Ethernet interface with fixed IP
addresses.
1. Switch on the constant temperature equipment.
2. Press the [Enter key] to open the menu.
3.
Select the menu items from Setup  Basic setup  Ethernet  LAN
configuration  DHCP client using the cursor keys.

The options [O] and [On] appear on the display.
4. Select the option [On] and press [OK] to confirm.

A check mark is set. The DHCP client is active. The Ethernet
interface is configured automatically.
5. In the [PC control] menu, select the [on] entry.

A check mark is set. The control for the control station is acti-
vated.
6. If required, enter the port number in the [PC control] menu.
1. Switch on the constant temperature equipment.
2. Press the [Enter key] to open the menu.
3.
Select the menu items  Setup  Basic setup  Ethernet  LAN
configuration  DHCP client.

The options [O] and [On] appear on the display.
4. Select the [O] option and press the Enter key to confirm.

A check mark is set. The entry has been accepted.
5. Use the left arrow key to go back one menu level.
6. Scroll to the numerical values of the [Local IP address] menu item and
press the Enter key.

The Local IP address
menu opens.
7. Byte 1 is marked. Press the right arrow key.

The entry window opens. The area in which the numerical values
can be entered is displayed.
8. Enter the numerical value for byte 1. Confirm the value with the Enter
key [OK].
The numerical values are entered byte by byte. From top
to bottom, from byte 1 to byte 4, for example 120.0.0.13
(Byte1.Byte2.Byte3.Byte4).
Press [ESC] to cancel the entry.
Obtain LAN configuration automatically
(DHCP client on)
Specify LAN configuration manually
(DHCP client o)
V6 Integral Process Thermostats and High-Temperature Thermostats 47 / 198

Lauda IN 530 T Specifications

General

Brand	Lauda
Model	IN 530 T
Category	Thermostat
Language	English