Need help?Do you have a question about the Lauda Integral T 7000 W and is the answer not in the manual?
General| Cooling Capacity at 20°C | 7 kW |
|---|---|
| Heater Power | 9 kW |
| Temperature Stability | ±0.01°C |
| Heating Capacity | 9 kW |
| Power Supply | 400 V, 50 Hz |
General safety precautions for operating LAUDA process thermostats.
Important safety guidelines for operation and maintenance.
How the control unit, LC display, and safety system work.
Description of connectors for standby, alarm, analogue, and serial interfaces.
Instructions for positioning the equipment and ensuring proper ventilation.
Steps for filling the equipment with heat transfer liquid.
Information on approved heat transfer liquids and their properties.
Requirements for cooling water purity and quality.
Instructions for connecting the equipment to the power supply.
Steps to turn on the equipment and initial self-test.
How to select and enter a new temperature setpoint.
Using the unit's function to store temperature-time programmes.
Steps for selecting and starting a stored programme.
Functions for selecting, inputting, and altering programmes.
Accessing and modifying various operational parameters.
Configuration of analogue signal inputs and outputs.
Procedures for calibrating analogue inputs and outputs.
Adjusting control parameters for internal outflow control.
Setting proportional band Xp for outflow controller.
Adjusting control parameters for external control.
Table of error messages and their explanations.
How to set and test the overtemperature protection.
How low-level protection works and how to test it.
Monitoring for pump motor overload or blockage.
Handling and indication of other error messages.
Instructions for cleaning the equipment.
Guidelines for maintenance, repair, and safety precautions.
Recommended servicing intervals for various system parts.
Contact information for service and ordering spare parts.
To Next Page
