Integral T process thermostats
21/01/2019 / YAWE 0026 Starting up 31
If necessary add more bath liquid to replace the amount pumped out to fill the
external circuit.
If the low-level indication appears.
A dual tone sounds.
The fault triangle is flashing.
Press the key.
Also press the key if the equipment had switched off
in fault status due to other faults.
7.3 Key functions
7.3.1 General
Change to the next level, also marked by two dots
behind the symbol.
Activates input, display is flashing.
Scrolls with keys within the particular level,
or setting numeral values.
Accelerated input through:
a) Holding down the keys or
b) pressing and holding down one of the two keys and
immediately afterwards pressing the other key briefly.
Briefly (1 sec.) releasing the key(s) and again pressing
one of the keys moves one digit to the right.
In principle: after the setting has been completed it is
entered automatically after approx. 4 sec or
immediate entry of the setting with key.
To Next Page
Loading...
Need help?
General
