Lauda Integral T 7000 W User Manual

Integral T process thermostats
42 Starting up YAWE 0026 / 21/01/2019
 I. e. pressing the key terminates the programme run. The
final setpoint is retained.
 You are at the beginning of the start menu. The
programme can be started from the beginning (segment
01)
( Section 7.6.3.3) or you can exit the menu with END
( Section 7.6.3.2).
Pause:
 With the instruction PAUSE the programme run is stopped
(held) at the current position. The display changes to
CONt.
 You can exit the menu with END in the usual way.
Continue:
 Pressing the key continues the programme at the point
where it has been stopped (held).
 After the supply has been OFF and ON again while the
programme is running, the programme is pause (held), i.e.
it can be continued with CONt.
7.6.3.5 INFO submenu
 In this area the current programme data can be
indicated at any time while the programme is running.
( Section 7.6.3.2).

Lauda Integral T 7000 W Specifications

General

Brand	Lauda
Model	Integral T 7000 W
Category	Thermostat
Language	English