Integral T process thermostats
21/01/2019 / YAWE 0026 Starting up 43
With this key from PAUSE or CONt to the INFO menu.
On pressing this key, line 2 of the display shows the
number of the programme selected.
Line 2 shows programme 5.
Pressing the key changes the display to the current
programme LOOP.
“1“ means that the programme is running in the first of
the programmed runs.
Pressing the key changes the display to indicate the
current segment number.
Pressing the key changes the display to indicate the
elapsed time in minutes for the current segment.
To Next Page
Loading...
Need help?
General
