2
Unpacking
DANGER!
Transport damage
Electric shock
Inspect the device for transport damage before
commissioning.
Never put the device into operation if you have dis-
covered any transport damage.
Personnel:
Operating personnel
1. Unpack the device.
Keep the original packaging of the device for later
transport.
2. Inspect the device and the accessories immediately after
delivery for completeness and transport damage.
If there is unexpected damage to the device or
accessories, inform the carrier immediately so that
a damage report is produced and a check of the
transport damage can be made. Also inform
LAUDA Constant Temperature Equipment Service
immediately. Contact details can be found in
Ä
Chapter 12.3 ‘LAUDA contact’ on page 63.
Accessories included as standard
Device type Designation Quantity
Catalogue
number
MC 600, MC 1200 (W) ¾" olive with ¾" union nut 2 EOA 004
All equipment Operating manual 1 --
Unpacking
Microcool 11
To Next Page
Loading...
