LAUNCH TECH X-PROG3 - Perform Common Operations

6
LAUNCH
X-PROG
3
EN
• 3.1.3 Perform Common Operations
You should enter the function interface before using the programmer.
1. Turn on a Launch diagnostic tool, and/or open on the home
screen.
2. On the main diagnostic screen, enter Anti-theft system either from
Local Diagnose
or
Reset
, touch
OK
.
3. You will view the connection diagram, touch
OK
.
4. Depending on your requirement, touch any of the following options :
• Gear Box Learning
• Anti-Theft System
• Engine System
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu