Launch KES-200 - Page 43

LAUNCH KES-200 Cylinder Analysis
G-4
Press [6] key to select [6.CYLINDER
ANALYSIS], the screen will display the first-level
function menu, as shown in Fig.7-03, press [1]
or [2] key to select the auto or manual power
balance test respectively.
Fig.7-02
Fig.7-03
Automatic Power Balance Test
On the first-level function menu, press [1] key to
select [1.Power Balance (Auto)], the screen will
display the second-level function menu as
shown in Fig.7-04.
Fig.7-04
On the second-level function menu, you can
press [ESC] key to exit, or press [HELP] key to
get the help information, as shown in Fig.7-05.
Fig.7-05
Press [▼] or [▲] key to select the desired item,
and press [ENTER] key, the screen will display
the corresponding information.
Enter the Power Balance Test
On the second-level function menu, select
[1.TEST]. The screen will display the interface
for selecting the number of cylinders, as shown
in Fig.7-06.