LAUNCH
22
Report: To save the current data in text format. All reports are saved in User Info -> My Report ->
Health Reports.
Record: Tap to start recording diagnostic data. Recorded live data can serve as valuable information to
help you in troubleshooting of vehicle problems. All recorded files are stored in User Info -> My Report
-> Recorded Data.
Help: Tap to view the help information.
Save Sample: This item enables you to customize the standard range of live data stream items and
save it as sample file. Each time you run the data stream items, you can call out the corresponding
sample data to overwrite the current standard range.
Tap it to start recording the sample data
(Note: Only data stream items with units will be recorded)
. Once
recording is complete, tap to stop it and navigate to the data modification screen.
Tap the value to change it. After modifying all desired items, tap Save to save it. All data stream files
are stored in User Info -> Sample.
D. Read Freeze Frame
This option takes the snapshot of the operating conditions when a vehicle fault occurs.
E. Actuation Test
This option is used to access vehicle-specific subsystem and component tests. Available test vary by
vehicle manufacturer, year, and model.
During the actuation test, the tablet outputs commands to the ECU in order to drive the actuators, and
then determines the integrity of the system or parts by reading the ECU data, or by monitoring the
operation of the actuators, such as switching a injector between two operating states.
F. Special Functions
This option offers coding, reset, relearn and more service functions, to help vehicles get back to
functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and
model.
To Next Page
Loading...
Need help?
General
