Launchkey MIDI controller keyboard - Launch Pads and Track Navigation

18
English
Round buttons
Thetwolarge,roundbuttons[9]transmitxedMIDICCmessages(upper=104,lower=105)
when Launchkey is in Basic Mapping mode. When InControl is active, or when Launchkey is
connectedtoaniPadrunningoneoftheNovationapps,theyhavespecicfunctionswithinthe
software being used. In Cubase, Logic Pro and Pro Tools these buttons will shift the current bank
ofmixercontrolseightchannelsleft(upperbutton)orright(lowerbutton).
Track I / H
The two Track I / H buttons [13] are only operative in InControl mode. They allow you to ‘step’
the slider(s) between tracks or instruments in your DAW.
On Launchkey 49 and 61, the Track I / H buttons step through the DAW tracks in banks of eight,
re-assigning the eight sliders to control the next set of tracks accordingly.
On Launchkey 25, the single slider can be stepped through consecutive DAW tracks in the same
manner by successive presses of Track I / H.
Note that the action of the Track buttons can differ slightly between DAWs; for example, Logic
Pro automatically selects the next bank of eight tracks when you step from the “last” track in a
bank of eight; e.g., stepping from track 8 to track 9 switches the controlled tracks from 1-8 to 9-16.