112146-61 www.amdry.com 13
To accelerate press and hold in
“LO Temp” selection button.
Display reads program locations
and will advance downward until
“LO Temp” selection button is released.
To enter a specific program location
(i.e. PL01) push the “Perm Press”
selection button.
Display will read specific program
location called up.
To exit program mode, open
program switch. Display reads.
and/or
(Example)
Continued
LO Temp
PL03
PL02
PL01
Perm Press
°FAr
FILL
25
To Next Page
Loading...
