112146-61 www.amdry.com 33
Program Location 14 (PL14)
Maximum Time for Auto Dry
Location to be viewed/changed.
Press “Perm Press” key.
Display will read “Adrt,” automatic
maximum drying time for 3-seconds
and then time programmed. If no
change, press “Perm Press” key,
otherwise press “HI” or “LO”
key and then “Perm Press” key.
Summary: The maximum auto dryness time is programmable from 1 to 99 minutes.
PL14
Adrt
Perm Press
25 HI Temp
Perm Press
LO Temp
Refer to Programming
Instructions for instructions on
entering program locations.
(Wait 3-Seconds)
("Hold In" to Accelerate) ("Hold In" to Accelerate)
PL15
Proceed to next location
to be changed
To exit program mode,
open program switch
Time Decrease Time Increase
To Next Page
Loading...
