69
APPENDIX A
ERROR CODES
All errors are displayed on line 4 of the display when the 6600 is in the Main screen.
An error must be acknowledged before any other key entries are accepted. The
error may be acknowledged either by pressing the CANCEL or the CLR key.
ERROR CODES DESCRIPTION
1 Ps2 target exceeds limit
2 Ps2 actual value exceeds limit
3 Pt target exceeds knots limits
4 Pt target exceeds mach limit
5 Rate target exceeds limit
6 Ps1 target exceeds altitude limits
7 Pt actual value exceeds knots limits
8 Pt actual value exceeds Mach limit
9 Ps actual value exceeds altitude limits.
10 Ps2 EQZN transducer error
11 Profile error
12 Ps1 EQZN transducer error
13 Pt EQZN transducer error
14-18 Internal use only
19 Ps2 Target exceeds Diff limits
20 Ps2 Actual exceeds limit
21 Ps2 Target exceeds Qc limit
22 Ps2 Target exceeds Mach limit
23 Ps2 Target exceeds Alt limit
24 Ps2 Actual exceeds Qc limit
25 Ps2 Actual exceeds Mach limit
26 Ps2 Actual exceeds Alt limit
To Next Page
Loading...