Laversab 6300 - User Manual

505 Gillingham Lane
Sugar Land, TX 77478
O: (281) 325-8300
F: (281) 325-8399
E: aservice@laversab.com
Document Number: 125-9106A
MODEL 6300 Rev. H
USER'S MANUAL
Date: March 21, 2016.

Summary

WARNING

SECTION 2: CONTROLS & CONNECTIONS

2.2 REMOTE UNIT

SECTION 3: OPERATING THE 6300

3.1 START-UP

Provides a step-by-step guide for the initial power-on and setup procedure of the 6300.

3.2 MAIN OPERATING SCREEN

Explains the elements displayed on the main operating screen, including Pitot and Static outputs.

3.3 CHANGING UNITS

Details the procedure for changing the measurement units for Pitot and Static outputs.

3.4 CHANGING TARGET VALUES

Guides the user on how to set and adjust target values for Pitot and Static outputs.

3.5 CHANGING RATE TARGET VALUES

3.6 CHANGING MODES

3.6.2 LEAK CHECKS

Provides detailed procedures for performing leak checks on Pitot, Static, and simultaneous outputs.

3.7 SELF-TEST FUNCTION

Details the process of running the built-in self-test for system diagnostics.

3.8 GO-TO-GROUND FUNCTION

Explains the Go-To-Ground function for setting outputs to ambient pressure.

3.10 OTHER FUNCTIONS

3.11 INTERNAL-BATTERY OPERATION

3.12 LEAK-CHECKING THE 6300

SECTION 4: PROFILES

4.2 CREATING A PROFILE

4.4 LOADING PROFILES

4.5 RUNNING A PROFILE

SECTION 5: TYPICAL USE

SECTION 6: CALIBRATION

6.1 EQUIPMENT

6.3 SETUP OF 6300

6.4 CALIBRATION PROCEDURE

Provides a comprehensive step-by-step guide for calibrating the 6300 unit.

6.5 VERIFICATION PROCEDURE

Outlines the process for verifying calibration and correcting transducer non-linearity.

SECTION 7: MAINTENANCE

SECTION 8: RS232 SERIAL INTERFACE

8.1 COMMUNICATION SETUP

APPENDIX A: ERROR CODES

APPENDIX B: SPECIFICATIONS

APPENDIX E: WI-FI OPERATION

Laversab 6300 Specifications

General

Brand	Laversab
Model	6300
Category	Controller
Language	English