LawnMaster NPTGSP2517A Service Manual

24
GENERAL TROUBLESHOOTING
■ Check the ywheel is in good condition and installed into place. Examine it for signs of damage.
Check if the rotor magnets meet the requirements. Check that the ns are in good condition.
Replace with a new ywheel if necessary.
■ Align the positioning tab on the ywheel with the positioning groove on the shaft when installing the
ywheel. Make sure it is installed into place (Fig. 23-25).
Fig. 23
Fig. 25Fig. 24
Positioning
Tab
Positioning Groove

LawnMaster NPTGSP2517A Specifications

General

Brand	LawnMaster
Model	NPTGSP2517A
Category	Trimmer
Language	English