22
STARTING AND STOPPING THE GRASS TRIMMER (See Figs. 25-31)
For cold start:
■ Make sure that the battery pack is securely in place.
■ Place the trimmer on a levelled surface, outdoors.
■ Press the primer bulb 5 times or until the bulb lls with fuel.
■ Turn the choke lever to the CHOKE position (Fig. 25).
BALANCING THE GRASS TRIMMER (See Figs. 23-24)
If the shoulder strap clasp and shoulder strap (sold separately) are used for your convenience, balance
the grass trimmer before starting the trimmer.
■ Loosen the screw on the shoulder strap clasp.
■ Slide the clasp to a comfortable operating position, and then tighten the screw moderately (Fig. 23).
■ Let the machine hang from the strap and wait until it is in balanced position. Ensure the machine
hangs freely above the ground. The cutting head should just touch the ground (Fig. 24).
■ Tighten the screw until the machine is in the oating position.
Fig. 23 Fig. 24
Fig. 25
OPERATION
To Next Page
Loading...
Need help?
General
