10
1406233 1406234 1406235 1406236 1406237
Tower models
Design: Safety structure P2
1406233 – 1406237
Tower model
1406233 1406234 1406235 1406236 1406237
Working height [m] 4.61 5.61 6.61 7.61 8.61
Tower height [m] 3.83 4.83 5.83 6.83 7.83
Platform height [m] 2.61 3.61 4.61 5.61 6.61
Weight [kg] (without ballast) 145.5 174.6 197.2 223.0 245.6
Ballasting
In closed areas
Assembly central 0 0 0 l2 r2 l2 r2
Assembly off-centre L0 R4 L0 R6 L0 R8 L0 R10 L0 R14
Assembly off-centre with wall bracing 0 0 0 0 0
In the open
Assembly central 0 0 l2 r2 l4 r4 l8 r8
Assembly off-centre L0 R6 L0 R10 L0 R12 L0 R18 L0 R22
Assembly off-centre with wall bracing 0 0 0 0 0
X = not permissible / not possible 0 = no ballast required Specified as single ballast weights of 10 kg each.
For ballasting, use Layher ballast weights, Ref. No. 1249.000, of 10 kg each. The weights are fastened quickly and securely at the right place using the hand-wheel coupler.
No liquid or granular ballast substances may be used. The ballast weights must be distributed evenly to all ballasting fixing points (see pages 22 – 23)
Example: l2, r2 2 ballast weights of 10 kg each must be fastened to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg each to the right-hand side
L6, R16 6 ballast weights of 10 kg each must be fastened to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg each to the right-hand side
r and R relate in the case of lateral assembly always to the side facing away from the tower; l and L relate to the side facing the tower (see also Section 9, Ballasting, on pages 22 – 23)
To Next Page
Loading...
General