PAGE 2
Table Of Contents
Introduction 2
Jumpstart, or “Real hams don’t read manuals!” 3
Specifications 4
An Important Word About Power Levels 4
Important Safety Warning 4
Getting to know your AT-600ProII 5
Front Panel 5
Back Panel 6
Installation 7
Basic Operation 10
Using the Front Panel Buttons 10
User Configuration Options 10
Transmitting and Receiving 13
Tuning 14
Basic Tuning Operation 14
Manual Memory Tune 14
Manual Full Tune 15
Bypass Mode 16
Error Indication 16
Advanced Operation 18
Manual Inductor/Capacitor Adjustments 18
High/Low Relay Adjustment 18
Manual Memory Store 18
Status Check 19
Application Notes 20
Mobile Operation 20
Internally Generated RF Noise 20
MARS/CAP Coverage 20
Operation with LDG Electronics M-600 External Meter 21
Tuning Hints 21
Theory of Operation 21
Some basic ideas about impedance 21
Transmitters, transmission lines, antennas, and impedance 22
The LDG AT-600ProII 24
A Word About Tuning Etiquette 25
Care and Maintenance 25
Quick Reference 26
Technical Support 27
Two-Year Transferrable Warranty 27
Out Of Warranty Service 27
Returning Your Product For Service 27
Product Feedback 28
To Next Page
Loading...
