Need help?Do you have a question about the LDG RJ45 and is the answer not in the manual?
Describes the front panel layout including the pushbutton and LEDs.
Details the rear panel RJ45 jacks and power connector.
Explains internal jumpers for rewiring port connections.
Explains how to select ports using the front panel pushbutton.
Details how to use the SLS-2 in a 'remote mode' by controlling power.
Discusses using the SLS-2 to connect equipment and mentions internal jumpers.
Provides detailed procedure for rewiring internal jumper headers.
Shows the pinout for the SLS-2 RJ45 jacks and jumper headers.
Provides pinout details for Kenwood microphones.
Provides pinout details for Icom microphones.
Provides pinout details for Yaesu microphones.
Information on contacting customer support and using the website.
Details the terms and transferability of the product warranty.
Policy for obtaining service for products after the warranty period.
Instructions on how to return a product for repair service.
To Next Page
General