Need help?Do you have a question about the LDG YT-1200 and is the answer not in the manual?
Crucial safety precautions regarding antenna installation and power lines.
Explains how to initiate tuning cycles, including memory and full tuning.
Summarizes the functions of the Tune button based on press duration (short, medium, long).
How to integrate PC control with the tuner and transceiver using the CAT port pass-through.
Crucial safety precautions regarding antenna installation and power lines.
Explains how to initiate tuning cycles, including memory and full tuning.
Summarizes the functions of the Tune button based on press duration (short, medium, long).
How to integrate PC control with the tuner and transceiver using the CAT port pass-through.
General| Type | Automatic Antenna Tuner |
|---|---|
| Input Impedance | 50 ohms |
| Output Impedance | 50 ohms |
| Latching Relays | Yes |
| SWR Display | Yes |
| Connectors | SO-239 |
| Frequency Range | 1.8 to 54 MHz |
| Tuning Time | 0.1 to 6 seconds |
| Dimensions | 5.5 x 10.5 inches |
| Weight | 1.5 pounds |
| Memories | 2000 |
| Power Requirements | 12 to 15 volts DC at 500 mA |
| Compatible Transceivers | Yaesu FT-450, FT-991, FT-991A, FT-857, FT-897 |
| SWR | Less than 1.5:1 |
To Next Page
