High Voltage Digital Stepper Drive 3DM2283 Manual
Page
2
of
7
3DM2283 3-phase Digital Stepper Drive
150-220VAC, 0.5-8.2A peak, Auto-configuration, Low Noise
Anti-Resonance provides optimal torque and nulls mid-range instability
Motor auto-identification and parameter auto-configuration technology, offers optimal
responses with different motors
Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus
offers smoother motor movement
Microstep resolutions from full-step to51,200.
Soft-start with no “jump” when powered on
Supply voltage up to +220 VAC
Output current programmable, from 0.5A to 11.7A. It can also be set via DIP switches.
Pulse input frequency up to 200 KHz
5V optically isolated input
Automatic idle-current reduction (Reduction rate can be software configured)
Suitable for 3-phase motors
Support PUL/DIR and CW/CCW modes
Over-voltage, over-current protections
Descriptions
The 3DM2283 is a high voltage, fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion
control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its
motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared
with traditional analog drives, 3DM2283 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its
unique features make 3DM2283 an ideal choice for high requirement applications.
Applications
Suitable for a wide range of stepper motors, from NEMA size 34 to 51. It can be used in various applications such as laser cutters, laser
markers, high precision X-Y tables, labeling machines, CNC router, etc. Its unique features make the 3DM2283 an ideal choice for
applications that require both low-speed smoothness and high speed performances
To Next Page
Loading...
