Leadshine ES2-DA808 - User Manual

User Manual
ES2-DA808
Vector Easy Servo Drive
Revision 1.0
©2016 China Leadshine Technology Co., Ltd.
Address: Floor 11, Block A3, Nanshan iPark, Xueyuan Avenue 1001, Shenzhen, Guangdong, 518055, China
Tel: (86)755-26409254 Fax: (86)755-26402718
Web: www.leadshine.com Sales: sales@leadshine.com
Support: tech@leadshine.com

Summary

Electrical Specifications

Connectors and Pin Assignments

Control Signal Connector CN1

Pin assignment details for the CN1 control signal connector on the ES2-DA808.

Encoder Signal Input CN2

Power and Motor Connector

Connector Pin-Out Diagrams

Motor Encoder Cable Pin-Out

Wiring Diagrams

Power Wiring

Control Signal Wiring

Configuring ES2-DA808

Configuring via On-board HMI

Guide to using the drive's built-in HMI for configuration.

Configuring via ProTuner Software

Instructions for configuring the drive using ProTuner software.

Frequently Asked Questions

Leadshine ES2-DA808 Specifications

General

Product Type	Digital Servo Drive
Output Current	8A
Feedback	Incremental Encoder
Communication Interface	RS-232
Protection Features	Over-voltage, over-current, short-circuit
Operating Temperature	0 - 50 °C
Storage Temperature	-20°C to +70°C
Humidity	5-95%RH, no condensation