Important notes for using a Leakwise system
• Refer to the relevant Sensor User Guide for specific information about sensor
certification, installation and operation.
• Consider the following during operation:
1. Beware of high voltage 110 or 220 ±5% VAC inside the enclosure of the controller
unit! Only qualified personnel may service the System.
2. For a Signal Processor in a NEMA 7 or Exd enclosure installed in a Hazardous Area:
The enclosure may be opened for service only when the surrounding atmosphere is
known to be non-explosive! Consult your local Safety Officer!
3. For a Signal Processor in a NEMA 4 (IP65) enclosure: Close the cover properly to
attain the weatherproof properties of the enclosure.
4. Ambient operating temperature: -40 to +80°C (-40 to +176°F)
5. Maximum relative humidity inside enclosure: 95%, non-condensing.
6. Maximum altitude: 2000 m.
To Next Page
Loading...
