GETTING STARTED
When you use the LeapPods Max™ for the first time, move the
On/Off Switch to the On position( ). When powered on,
the Indicator Light will turn green.
Battery Charging
Note: Adult operation required.
The LeapPods Max™ cannot be used while charging, even if
power is turned on.
When the battery is low, the Indicator Light will turn red.
To charge the LeapPods Max™, connect it to a computer using
the included Micro-USB Cable. To do so correctly, please follow
these steps:
• Please charge the LeapPods Max™ before first use.
• The LeapPods Max™ can be charged either in On or Off mode.
• Open the rubber cover of the USB Charging Port on the
bottom of the LeapPods Max™.
• Insert the small end of the included Micro-USB Cable into the
USB Charging Port on the LeapPods Max™.
• Insert the large end of the included Micro-USB Cable into a
USB port on your computer.
• The Indicator Light will turn orange while the LeapPods Max™
is charging. After the battery is fully charged, the Indicator
Light will turn green. You may then disconnect your fully
charged LeapPods Max™ headphones from the computer.
•
This toy contains a rechargeable battery that is non-replaceable.
USB port for battery charging:
The current output of USB DC 5V, with a minimum of 0.5A
3
To Next Page
Loading...