11. Automatic Shut-Off
To preserve battery life, the unit will automatically go to
sleep after 5 minutes of inactivity. The unit can be woken
up by pressing the Play Button.
PLAY MODES
1. Pairing Mode
•
Press the Pairing Button to turn the Bluetooth
®
connection on
or off. Press and hold the Pairing Button for 3 seconds to go
into Pairing Mode.
• The Indicator Light will flash blue when waiting for a
connection.
• Choose the LeapPods Max™ from your peer device to send
the connection request. Press and hold the Play Button for
3 seconds to confirm.
Bluetooth
®
will be disconnected after
60 seconds if the connection is not confirmed.
• When the connection is confirmed, the Indicator Light will
turn solid blue.
• The LeapPods Max™ will automatically connect to confirmed
devices.
2. Line-In Mode
Make sure the headphones are powered on. Plug in the
included 3.5mm Audio Cable to the 3.5mm Audio Port on
the headphones and connect the other end to an external
device.
7
To Next Page
Loading...
General