Lear Siegler ADM 3A - Power Turn-Off; Cleaning; Inspection

____ LEAR SIEGLER, INC.
DATA PRODUCTS DIVISION
2.9 POWER TURN-OFF
If the unit is displaying information which must
be retained, be sure to transmit this information to
the host immediately. This is necessary because
the display is cleared when power is removed from
the unit. An alternative is to send the information
to a printer prior to turning the unit off.
2.10 CLEANING
At periodic intervals, clean the exterior housing
and lightly dust the unit using a soft brush or
damp lint-free cloth. However, paper towels may
be substituted if desired. Remove smudges from
the CRT exterior housing ¥.~th conventional spray
2-10
cleaners or alcohol. Do not use petroleum base
cleaners, such
as lighter fluid, as this could be
harmful to the painted surface. US4~ only a lint-free
soft cloth
to clean the CRTscreen. Be careful not to
.cratch the CRT screen, and do not U8e freon
cleaners, alcohol, or
ammonia.
2.11 INSPECTION
Periodically inspect keyboard usembly for
freedom
of movement. Determine whether the
intensity of character trace on the CRT .creen has
not diminished. Any required mechanical or
electrical
adjustment should be performed onlyby
an authorized Lear Siegler Service representative
to ensure W81"l"anty.