p.31 MyWay+ User Manual
• Ensure the frame brakes
have been applied-
see section 9.6 ‘Applying/
releasing brakes’ for
instructions.
• Disconnect the grey clips
on the shoulder straps
from the grey buckles on
the harness. Flip the
straps backwards over
the user’s shoulders.
• Disconnect the red clips
on the harness connection
point straps from the red
buckles on the harness
(both sides).
• Disconnect the white clips
on the harness connection
point straps from the white
buckles on the harness
(both sides).
10.6 Detaching the harness from the frame
Warning – if necessary, ensure the user is supported
whilst buckles are disconnected either by attaching
and using the optional saddle accessory, or via help
of another person.
• Transfer the user out of the
frame – see section 10.4
‘Transferring the harness
out of the frame’ for
instructions.
In Wheelchair Sitting
• Disconnect the groin straps
by releasing the black buckles.
Transfer the user’s weight from
side to side to release the straps
from under the user’s thighs.
• Release the black buckles
situated above and below the
striped belt.
• Release the stripe belt strap.
• Open the harness wrap.
• Lean the user forwards and slide
the harness upwards from behind
to remove.
10.7 Removing the Harness
To Next Page
Loading...
