MyWay+ User Manual p.46
13.0 Cleaning and
Care Information
Harness
• The harness can be
machine washed at
60°C on a gentle program.
1) Lie the harness out at,
with coloured buckles
facing upwards.
2) If the groin straps are
connected to the black
buckles, release the
straps and connect them
into the grey buckles-
ensure this is done on
both sides.
3) Fold the stripe belt strap
back so it is fastened onto
the Velcro, underneath
the groin strap.
4) Fold the harness inwards,
so the coloured inside is
visible, and fasten
the Velcro.
5) Place the harness inside
the wash bag provided,
pull the drawstring ties
to close and tie them
in a bow.
• Do not tumble dry.
• Most stains can be
removed using a clean
microbre cloth and
lukewarm water. This
method of cleaning is
more effective than a
standard cloth, water
and proprietary soap.
Warning – It is
recommended that the
harness is stored at
when not in use.
Microbre consists of very
ne threads of polyester and
nylon that combine to form a
single thread. One microbre
is 100 times thinner than
a single strand of human
hair. Microbres are so small
that they attach themselves
to even the smallest, most
microscopic dirt particles
– ones that normal cloths
crudely brush past. For these
reasons dirt and dust are
hoovered up by microbre
cloths. This is cleaning
naturally without chemicals.
Microbre cloths must
always be clean as the dirt
can stay locked inside the
cloths bres.
Washing in hot water will
release any dirt particles
being held.