MyWay+ User Manual p.32
11.0 Accessories
Set-Up/Features
11.1 Adult Handles
Note – do not rotate the handles towards the childs head
as they may clash.
Do not hang items on the adult handles as this may
cause the product to become unstable.
• The adult handles
connect to the frame via
the handle receiver
• To attach the adult
handles, rstly ensure the
grey clamping lever is
open
• Then lift the rubber
cap
out of the receiver
housing
• Insert adult handles
ensuring the alignment
pin is facing away from
the clamping lever
• Once attached ensure the
safety button
is in an
inward position and no
red markings are visible
• Then close the grey
clamping lever
• To adjust the height of
the adult handle depress
height adjust trigger
and rotate handles to
the desired position, then
release trigger.
• To remove the adult
handles open the grey
clamping lever
• After this pull out release
safety button
• Then lift adult handles out
of the handle receiver
Scan the QR code
with your phones
camera to view
To Next Page
Loading...
