Squiggles Stander - User Manual p11
The Pivot Chassis can be easily folded
for storage or transportation. To unfold,
release the levers shown by pressing
them together, rotate the rear tubes until
the levers engage in the locked position.
To fold the chassis simply reverse this
procedure.
The Squiggles Stander can be used as a
prone, supine or upright stander and has
been designed to fit with three chassis
options, the Mobile chassis, Pivot chassis
and the Easel chassis.
9.1 FOLDING AND
UNFOLDING THE PIVOT
CHASSIS
9.2 ATTACHING THE
STANDER TO ITS
CHASSIS
To attach the stander to the Pivot
Chassis, pull the locking pin out, slide the
central spine into the receiving bracket
until it is fully engaged, release the pin
allowing it to snap back into place.
9.3 ATTACHING
STANDER TO PIVOT
CHASSIS
Always remove the standing
support frame before trying to
fold the chassis.
Always use caution to ensure
fingers do not become
trapped when folding and
unfolding the pivot chassis.
Always make sure the locking
pin is fully engaged before you
place the child in the stander.
To Next Page
Loading...
