Squiggles Stander - User Manual p17
supine
9.13 ATTACHING THE
TRAY IN PRONE AND
SUPINE
The tray is attached to the stander by
inserting the tubes into the receiving
brackets. Once the tray is located in
position the knobs should be tightened.
The cut out of the tray should always be
facing the child. To attach the tray whilst
in the prone version, ensure that the tray
receiving tubes are at their maximum
height.
prone
Always use caution to ensure
the childs hands or arms do
not become trapped when
inserting the tray.
9.14 ATTACHING
THE GRAB RAIL
To attach the grab rail, inset the
receiving brackets in the tray slot and
secure with the plastic knob . Repeat
on the other side and then sleeve the
tubes into the tube and tighten the
plastic knob .
To Next Page
Loading...
