Squiggles Stander - User Manual p21
10.9 FLAT HEADREST
To attach the headrest cushion, place the
cushion onto the head support plate,
then snap the central fastener and two
upper fasteners in place. Bring the lower
flap under the plate and snap the two
remaining fasteners in place.
10.10 FLAT HEADREST
LATERALS
To attach the headrest lateral covers,
simply slide the covers on with the
padded side towards the inside of the
stander. Then bring the two Velcro
fastener straps around the bottom of the
moulding and attach them to the Velcro
panel as shown. Close over the flap.
To Next Page
Loading...
