PLEASE NOTE THE FOLLOWING:
Press the Frequency/Period operation button a second time to
select and adjust the Period parameter in the same manner.
While editing certain parameters using the Number Buttons,
applicable unit(s) are shown on the Operation menu. Press an
adjacent Operation button to select a desired Unit for your entry.
Provide your desired Frequency or Period using the Digital Input
Front Panel Controls (on page 27).
Amplitude/HLevel
With the Sine waveform and the Amplitude/HLevel operation button
pressed once, a Sine waveform is shown on the Waveform Display and
Amplitude is shown on the Waveform Detail dialog.
PLEASE NOTE THE FOLLOWING:
To Next Page
Loading...