Apodizing allows you to choose between and Apodizing and Linear
DAC modes. The Wavelet features an apodizing circuit that corrects
for the pre-ringing native to CODECs. Analog lovers can take
advantage of balanced XLR or unbalanced RCA inputs without
concern of digital artifacts. Turn on the apodization circuit by
choosing “Apodizing”. When unchecked, the DAC is in linear
mode, and the apodization circuit is bypassed. We recommend the
Apodizing mode.
Omnio switches the Omnio technology in and out. Omnio improves
channel separation and restores the directional vector relationship to
depth and position cues.
M1-M8 are 8 recallable contour presets, which will bring up the
saved contour settings underneath. save the contour sections at the
bottom of the remote, to up to 8 recallable settings. You can click
Info to see what has been saved. Clicking the Save button and
choosing a location will save the currently set contour settings.
Contour Settings
The sliders can be adjusted in the same way as the volume control-
by placing a finger on the center slider. Moving to the right creates a
boost (more volume) and moving to the left creates a cut (less
volume) in the given frequency band.
The most recent slider settings are retained permanently in the
Wavelet memory- even if you turn the unit off, Wavelet will
remember your settings.
To Next Page
Loading...
Need help?
General