12
Basic Operation
Turning the TV On and Off
Connect the power adaptor to wall AC Outlet. A front mounted indicator light will be
illuminated red indicating the TV has power.
Press the POWER button on the remote control or the TV set. The TV’s indicator light will be
illuminated blue indicating the TV is turned ON.
Press the POWER button again to turn the TV off. A front mounted indicator light will be
illuminated red indicating the TV is off.
Source selecting
The unit incorporates multiple input sources which can be selected via the
INPUT button on the television or remote. Press the INPUT button to enter
Input menu, as shown right.
Use the direction buttons and the ▲▼ ENTER button
On the input menu, press the direction button to select the desired ▲▼
input source. After several seconds, the TV will enter the selected source.
Or after you selected the desired source press the ENTER button to enter
the selected source immediately.
Use the INPUT button and the ENTER button
On the input menu, press the INPUT button repeatedly to select the
desired input source. After several seconds, the TV will enter the selected
source.
Or after you selected the desired source press the ENTER button to enter the selected source
immediately.
Channel Selection
1. Using CH▲/▼ button
2. You have also quick access to the different TV channels by using the numeric buttons.
3. Using LAST button on the remote control to view the last channel you were watching.
The First Time Installation
The first time you turn on the TV or after you reset all the settings to their original status, the
Auto Installation will start. Follow the prompts on the screen to set the Country, Language, Auto
Power Off and the Auto Search, then press ENTER button and the channel tuning starts
immediately.
All found TV programs will be saved into the channel list.
To Next Page
Loading...
Need help?
General
