LEGRAND 0 488 04 - Operation Modes and Synchronization; Auto ON;OFF Mode Functionality; Multi-Sensor, Multi-Load Synchronization; Multiple Sensors, Single Load Scenarios

5/8
CONTENTS
Technical data sheet: S000074405EN-2 Updated: 10/02/2016 Created: 18/01/2013
Catalogue Number(s): 0 488 04
PIR switch sensor
7. OPERATION (continued)
6.1 Several sensors connected to a single load
L OFF
S1 OFF
S2 OFF
Sn OFF
< 1 s
L ON
S1 ON
S2 ON
Sn ON
L ON
S1 ON
S2 ON
Sn ON
< 1 s
L OFF
S1 OFF
S2 OFF
Sn OFF
L ON
S1 ON
S2 OFF
Sn OFF
< 1 s
L ON
S1 OFF
S2 ON
Sn ON
L ON
S1 ON
S2 OFF
Sn OFF
> 1 s
+
< 1 s
L OFF
S1 OFF
S2 OFF
Sn OFF
L ON
S1 ON
S2 OFF
Sn OFF
> 1 s
L ON
S1 ON
S2 ON
Sn ON
PB
PB
PB
PB
PB
7. OPERATION
Manual ON/Automatic OFF mode
Pressing the auxiliary control allows the load to be switched on or off
manually. If the control is not pressed, the sensor will cut off the load
at the end of the time delay or when the light level threshold has been
reached.
Auto ON/OFF mode:
The load will be switched on and off automatically.
Option: It is possible to control the sensor by infrared remote control
using Cat. Nos. 0 882 00/01/20/31/32/33.
7.1 More than one sensor and more than one load
The products can be synchronised in two steps:
- one long press (>1s) - all the sensors (S) change to ON
- one short press - all the sensors (S) invert their state from OFF to ON
and ON to OFF
L1 OFF
L2 OFF
Ln OFF
S1 OFF
S2 OFF
Sn OFF
< 1 s
L1 ON
L2 ON
Ln ON
S1 ON
S2 ON
Sn ON
L1 ON
L2 ON
Ln ON
S1 ON
S2 ON
Sn ON
< 1 s
L1 OFF
L2 OFF
Ln OFF
S1 OFF
S2 OFF
Sn OFF
L1 ON
L2 OFF
Ln OFF
S1 ON
S2 OFF
Sn OFF
< 1 s
L1 OFF
L2 ON
Ln ON
S1 OFF
S2 ON
Sn ON
L1 ON
L2 OFF
Ln OFF
S1 ON
S2 OFF
Sn OFF
> 1 s
+
< 1 s
L1 OFF
L2 OFF
Ln OFF
S1 OFF
S2 OFF
Sn OFF
L1 ON
L2 OFF
Ln OFF
S1 ON
S2 OFF
Sn OFF
> 1 s
L1 ON
L2 ON
Ln ON
S1 ON
S2 ON
Sn ON
PB
PB
PB
PB
PB