1/8
Technical data sheet: S000074405EN-2 Updated: 10/02/2016 Created: 18/01/2013
Catalogue Number(s): 0 488 04
PIR switch sensor
1. USE
This device allows a light source to be controlled automatically through
the detection of movement in the surveillance zone.
It is equipped with a "presence" output for ventilation or lighting
control. This output is separate from the level of light.
Motion sensor with 360° detection angle.
Detection type: infrared (PIR)
Mounting type: ceiling
2. TECHNICAL CHARACTERISTICS
Voltage: 100 - 240 V~
Frequency: 50/60 Hz
No-load power consumption: 0.8 W
Output via normally open contact connected to the phase
Wiring: 2 x 2.5 mm
2
Drilling diameter: 85 mm without flush-mounting box
85 mm with flush-mounting box
Weight: 114 g
Impact resistance: IK04
Penetration by solid and liquid matter: IP20 (unmounted)
IP41 (mounted)
Usage temperature: - 5°C to + 45°C
Storage temperature: - 20°C to + 70°C
2. TECHNICAL CHARACTERISTICS (continued)
Cover removed
CONTENTS Page
1. Use.....................................1
2. Technical characteristics . . . . . . . . . . . . . . . .1
3. Dimensions.............................2
4. Connection .............................2
5. Installation .............................4
6. Removal ................................4
7. Operation ..............................5
8. Settings ................................6
9. Performance . . . . . . . . . . . . . . . . . . ........7
10. Care . . . . . . . . . . . . . . . . . . . . . .............8
11. Standards and approvals ................8
12. Troubleshooting ........................8
1 - Halogen bulb
2 - ELV halogen bulb with separate electronic ballast
3 - ELV halogen bulb with separate ferromagnetic ballast
4 - Fluorescent tube with separate ferromagnetic ballast
5 - ELV fluorescent tube with separate electronic ballast
6 - Compact fluorescent bulb with built-in electronic ballast
7 - Compact fluorescent bulb with separate ferromagnetic ballast
8 - Compact fluorescent bulb with separate electronic ballast
9 - LED bulb
10 - Contactor
11 - Motor
230 V~ 2000 W
8.5 A
1000 VA
4.3 A
10x(2x36 W)
4.3 A
500 VA
2.1 A
1000 VA
4.3 A
500 VA
2.1 A I max. ≤ 2A
110 V~ 1000 W 500 VA 5x(2x36 W) 250 VA 500 VA 250 VA
1 2 3 4 5 6 7 8 9
LEARN button
LEARN LED
Green
programming
indicator
IR transmission LED
(for configuration
tool)
Sensor/PIR
sensor
IR receiver LED
(for configuration
tool or remote
control)
Protective cover
Green
detection
indicator
Light level cell
230 V~ 2000 W
8.5 A
I max. ≤ 2A
110 V~ 1000 W
U ≤ 30 V=
2 A max.
To Next Page
General
